Multi Stage Ejector Series VME - 90% Vacuum
Home Multi Stage Ejector Series VME - 90% Vacuum

Multi Stage Ejector Series VME - 90% Vacuum

Material guide Print the sheet Email to a Friend
Your browser is not taking the item <canvas>.
Drag mouse to rotate
Drag mouse with shift pressed to zoom

Ref. VME 35


The multi-stage VME ejectors suck a large volume of air at start-up. They operate on the principle of the series mounted ejector. The ratio between the sucked air flow and the used air flow is excellent. For visual verification of the partial vacuum, a vacuum gauge is installed on the ejector.

- Very large sucked air flow as soon as compressed air is applied
- Low noise level
- Energy savings
- Excellent ratio between sucked air and used air

- Gripping porous products
- Creating a vacuum for thermoforming
- Short time to create a partial vacuum
- High throughput

Specifications of the VME 35
- Air sucked at 4 bar: 440 Nl/min i.e. 7.33 l/sec or 26.40 m3/h
- Vacuum at 4 bar (%): 70
- Air usage at 4 bar (Nl/min): 194
- Air sucked at 6 bar: 550 Nl/min i.e. 9.17 l/sec or 33.00 m3/h
- Vacuum at 6 bar (%): 90
- Air usage at 6 bar (Nl/min): 270
- Weight (g): 825
- Silencer model: SIL 12

- Compressed air: Filtered, not lubricated, pressure 2 to 6 bar
- Temperature: -20 to 100°C
- Material: Aluminium, silicone and neoprene gasket


Multi Stage Ejector Series VME - 90% Vacuum

Type Multi Stage
Vacuum 90%
Suction capacity 550 l/min at 6 bar


Related Products

SIL 12

Open Silencer Series SIL - G1/2"